Description
ABS+ material is a widely applicable engineering plastic with moderate shrinkage (0.4-0.7%).
Excellent processing properties such as good flow, bright, vivid colors and very good layer adhesion allow a wide range of applications for this filament. ABS+ has high impact strength and is impact resistant. ABS+ from ROSA3D gives an elegant semi-matte finish to the surface of prints. It can be smoothed with acetone.
Recommended printing parameters:
extruder temperature: 230-270°C
bed temperature: 80-110°C
Heated bed and chamber recommended. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.
PRODUCT PARAMETERS OF ABS+
Diameter: 1,75 mm
Net weight: 1000 g
Filament is vacuum packed with desiccant.
PHYSICAL PARAMETERS OF ABS+
Density: 1.05 g/cm3
Odor: irritating
Tensile elongation: 2,5%
Tensile strength (to break): 44 MPa
Tensile modulus: 2276 MPa
Heat distortion temperature: 99
