Outeq
Wholesale prices — for partners only
Register as a B2B partner to see prices, stock levels and place orders.
Register to see prices Already a partner? Log inThe OUTEQ FL4 is an emergency flashlight designed to be kept permanently in your vehicle. Within a single aluminum body, it combines an LED light with a beam distance of up to 150 meters, a tempered side window glass breaker tip, a seatbelt cutter, a side warning light, and an audible alarm. It charges via USB-C, while an integrated side solar panel provides continuous trickle charging, ensuring it stays ready even after months in the glove compartment.
The OUTEQ FL4 is designed for emergency situations that often catch drivers off guard at night: roadside breakdowns, changing a tire in the dark, marking an accident scene, or needing to quickly evacuate a vehicle. Instead of carrying multiple separate tools, one versatile device does it all—the front spotlight with a luminous flux of up to 310 lumens and a 150-meter beam distance is complemented by a side warning light, a glass breaker tip, a seatbelt cutter, and an audible alarm. Operation is straightforward via two buttons on the side of the head—one for lighting and one for the alarm—eliminating the need to memorize complicated button sequences in an emergency. It is ideal for drivers who frequently travel alone or at night and want signaling and escape tools permanently within arm's reach.
The front spotlight switches between High, Low, and Strobe modes, while the side LED strip provides High and Low diffuse white light, plus a sixth mode: red-blue strobe. The powerful front beam illuminates roadside ditches or distant hazards, while the low mode conserves battery during close-up tasks, such as checking fluid levels under the hood. The side LED strip delivers a wide, diffused area light rather than a long-range beam, making it ideal as a work light in situations where a focused beam would cause glare. The flashlight head can warm up during extended use at maximum output, as indicated by the "HOT" warning marked directly on the housing.
The side LED strip runs along the body of the flashlight, ensuring visibility from the side and wide angles where a front spotlight would go unnoticed. On a roadside, it helps mark a disabled vehicle or your work area, giving oncoming drivers early warning to steer clear. While the red-blue flashing strobe is highly conspicuous, please note that red and blue emergency lights on public roads are generally reserved for emergency response services; this mode is therefore intended for use off public roadways, such as on private property. The flashlight does not replace mandatory vehicle safety equipment, but supplements it with active, highly visible illumination.
The steel tip on the head of the flashlight is designed for emergency breaking of tempered side glass—windows that shatter into small granules upon impact. It is not suitable for windshields, which are always laminated, nor will it break laminated side windows found in some modern vehicles. The glass type is usually indicated in small print in the corner of each window, allowing you to check your vehicle's specifications in advance. The breaker tip is permanently exposed—no unfolding or unscrewing required—and strikes should be aimed at the corners of the window rather than the center.
The recessed razor blade in the flashlight head quickly slices through jammed seatbelts if the buckle fails or gets trapped after a collision. Housed in a narrow safety groove, it prevents accidental cuts during handling and requires no deployment; simply hook it around the webbing and pull through in a single motion. The built-in buzzer with three sound modes draws immediate attention if your vehicle lands off-road, behind a blind corner, or in a ditch where lights might not be visible. Sound penetrates where visual cues cannot—through dense fog, thick vegetation, or over terrain elevation.
The flashlight charges via a standard USB-C port with a 5V⎓1A input, making it compatible with ordinary phone chargers or in-car USB ports. The side-mounted solar panel acts as a trickle charger: when exposed to light, it offsets battery self-discharge over extended storage periods, though full recharging from zero is handled via the cable. This dual approach tackles the primary flaw of emergency gear—dead batteries right when you need help most. Inside is a built-in 18650 Li-ion cell with a 2,000 mAh capacity. Because lithium-ion batteries are sensitive to extreme heat, storing the flashlight in a door pocket or glove box during summer is preferable to leaving it on a sun-baked dashboard.
Measuring 200 mm in length, with a 45 x 33 mm cross-section and weighing 255 g, the FL4 easily fits into door storage compartments, glove boxes, or center consoles. The aluminum alloy body provides the structural rigidity essential for glass-breaking functionality, while the IP44 rating protects the electronics against rain, dust, and splashing water (not submersible). For an escape tool, placement is critical: keeping it within arm's reach of the driver's seat makes far more sense than storing it in the trunk, as you need to reach it even while buckled in. The subtle black finish blends discretely into the vehicle interior for permanent storage.
| Type | Multifunctional emergency car flashlight (LED) |
| Luminous flux | Up to 310 lumens |
| Beam distance | Up to 150 meters |
| Optics | Fixed front spotlight + side LED strip |
| Light modes | High, Low, Strobe / Side High, Side Low / Red-Blue Strobe |
| Audible alarm | Built-in buzzer, 3 sound modes |
| Glass breaker | Hardened tip for tempered side windows |
| Seatbelt cutter | Integrated blade |
| Battery | Built-in 1x 18650 Li-ion, 2,000 mAh |
| Voltage | 3.7 V |
| Charging | USB-C (input 5V⎓1A) + solar panel (trickle charging) |
| Power | 10 W |
| Ingress protection | IP44 |
| Body material | Aluminum alloy |
| Dimensions | 200 x 45 x 33 mm |
| Weight | 255 g |
| Color | Black |
| Product code (PN) | OU-MUF-FL4 |
| EAN | 8594215998884 |
| Warranty | 24 months |