Filament PLA CarbonLook 1.75mm 0.5kg Rosa3D

Kirjeldus

PLA CarbonLook by ROSA3D was designed for printouts in which the visual effect of the object is more important than its industrial application. It was made from PLA material (polyactide) with an admixture of carbon fibres. The result is a filament with unique visual properties. Printouts made from this filamet have a satin, glossy surface and barely visible layers.

Properties of PLA CarbonLook are similar to other PLA filaments available in our offer. This means easy printing, no stringing and very good interlayer adhesion. Printouts have very good detail reproduction and an unique surface. The friction of carbon fibres have been minimized to reduce friction and maximize the service life of brass nozzles.

PLA CarbonLook will work great even with basic 3D printers. It does not require a heated bed or chamber. It is characterized by low shrinkage and lack of odor.

Recommended printing parameters:

extruder temperature: 185-225°C
bed temperature: 40-60 °C
print cooling: 50-100%
print speed: 60-80 mm/s
Filament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.

PRODUCT PARAMETERS OF PLA CarbonLook

Diameter: 1,75 mm
Net weight: 500 g
Spool weight: 245 g
Filament is vacuum packed with desiccant.

PHYSICAL PARAMETERS OF PLA CarbonLook

Density: 1,24 g/cm3
Odor: odorless