KEMOT
Didmeninės kainos — tik partneriams
Užsiregistruokite kaip B2B partneris, kad matytumėte kainas, likučius ir galėtumėte pateikti užsakymus.
Registruotis ir matyti kainas Jau esate partneris? Prisijungti- Rated power: 700W
- Battery type: 12V DC
- Input voltage: 180 - 275V AC
- Output voltage: 230V AC +/-8%
- Output Voltage Form: Pure Sine Wave
- Battery charging current: max. 10A
- Switching time: =< 4ms
Most homes have devices that make our daily lives easier, but they need constant power to function properly. In winter, furnaces, pumps and other home heating devices deserve special attention. Therefore, in the event of a power cut, it is a good idea to have an emergency power supply.
KEMOT emergency power supply systems protect selected equipment from power failures that can cause disruption or interruption to their operation.
Considering a UPS for a gas stove, or maybe you are interested in a UPS for an eco-pea or pellet stove? The PROsinus KEMOT series is ideal as an emergency power supply for central heating pumps or pumps in a fireplace installation, as well as for induction motors or, for example, for automation installations using heat convectors, and for all installations that are particularly sensitive to minor changes in the voltage waveform. They have the advantage of a pure sinusoidal output voltage waveform (when supplying loads), which ensures stable operation, preventing overheating of inductive loads. Together with a 12V battery they form a complete 230VAC guaranteed power supply.
- Emergency power supply for furnaces
- RTV equipment (TVs, receivers, hi-fi, DVDs)
- Household appliances (fridges, erasers)
- Power tools (drills, grinders)
- Power for chargers (smartphones, tablets, phones, laptops)
- Pumps, compressors (water, heat, air conditioners)
- Office equipment (faxes, computers, monitors)
KEMOT emergency power supplies have protection against overload, short-circuit and over- and under-voltage. They therefore guarantee safe operation in your home.
Emergency power mode with charging function converts the 12V DC voltage supplied by the external battery into 230V AC voltage and charges the external battery. The charger mode charges the external battery. Converter mode converts the 12V DC voltage from the battery to 230V AC voltage.
The KEMOT emergency power supply works with phase detection devices, such as some models of gas stoves. The phase in our device is in a constant position, regardless of whether it is powered from an electrical socket or from a battery.
The KEMOT PROsinus-1000-LFP4 uninterruptible power supply unit is equipped with a set of copper cables that guarantee an efficient power flow, minimise losses and ensure fast charging. Their robust design protects against overloads and overvoltages, which protects both the devices connected to the power supply and the power supply itself. The cables are easy to install and use, which increases comfort of use and device reliability at critical moments.
To ensure the highest quality of operation of the KEMOT emergency power supply, you need to choose the right battery for it. The optimum battery can be selected according to the following approximate formula: 100W load = 10A consumption from the battery.
A battery to power your home is not included.
The BAT TYPE function of the KEMOT PROsinus-1000-LFP4 power supply enables a set of cables that support both gel and lithium iron phosphate (LiFePo4) charging. This allows optimum adjustment of the charging parameters, which means a longer service life. LiFePo4 recharges faster, allowing the unit to run fully faster with minimal downtime.
KEMOT PROSinus emergency power supplies have a clear LED display that shows the current operating status of the unit. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.
The description was translated using an automatic translator. If you notice any discrepancies, please notify us by email: aprasymai@lemona.lt.
